|
"Xindak converged their
experience, technology, and
determination in developing this
superlative
dual-channel integrated
amplifier A600E"
Rated at 160W/channel @8W
and weighted at 121 pounds, nothing has been hold-back in making
A600E Xindak's best integrated.
No matter from whatever angle you
are approaching to this astonishing amplifier, you are promised
to be awarded. The general composition, the mechanical structure
or the circuit design. Each of them reflects the design
principle of perfectionism. Starts from the ultra strong chassis
and mechanical structure that eliminate possible sonic
degradation due to acoustic vibration. The 20mm thick faceplate
is a statement by itself.
The power supply system occupies
majority of the inside space. Two premium quality 580W toroidal
transformers are housed vertically in a specially built copper
shield that cuts off electromagnetic interference to the main
circuit. In the middle of the chassis are four Sweden top-grade
33000uF RIFA169 electrolytic capacitors. The enormous power
supply system ensures the A600E to drive any loads with
exceptional ease and control.
The A600E adopts full symmetric
complimentary current negative feedback circuit on which Xindak
has gained extreme success over the years. There are three
stages in the amplification chain. The first stage is based on
MJE350/MJE340 geminate transistors and the second stage uses
MJE15031/MJE15030 geminate transistors. Both of these
audiophile-grade transistors can be found on many top amplifiers
around the world. The output transistors are consisted of four
pairs of SANKEN 2SA1295/2SC3264 high-power high-current geminate
transistors on each channel; whose peak current could reach 68A.
Two pieces of copper plates help quickly transfer the heat
produced by the power transistors to the heavy-duty heat sinks.
As a flagship of Xindak's
products, only top-grade components find their way
into the A600E: Dale resisters from the USA, Wima MKP capacitors from Germany, Gotham
wiring from Switzerland, to name a few. Nothing less than truly
outstanding is left in.
A600E takes
two RCA unbalanced and one XLR balanced line-level inputs to
the preamplifier. It also allows direct input to the power
amplifier through a RCA input. Additionally, there is a RCA
output from its preamplifier.
A600E is the nucleus of your
ultimate music system. Its radiating beauty easily fills your
room. A600E's operation
is pleasantly intuitive and straightforward. The elegant front
panel can be wither a two-tone design, or a brush-aluminum
finish. It features a motorized volume control at the center, and two
soft-touch buttons for Power On/Off and Source selector.
Everything is microprocessor controlled, providing
additional protection against abnormal operations, including thermal runaway. The VFD display at the front
center provides current status of operation. The controls
and settings on the front panel can also be operated by the
full-function remote control that itself is CNC machined from a
sold block of aluminum.
Beyond and above its beauty, the best part of
A600E is its reference-level sonic performance that exceeds the expectations of
the most discriminating music lovers. The silk-like smooth, delicate, airy, relaxing, extended
and sweet highs, rich, warm, liquid mids, and the powerful lows with superb speed, weight
and control. The imaging and sound stage is absolutely stable and accurate. By packing
exceptional performance in a convenient package, the A600E brings you surprises that are beyond all
expectations.
Main Features
-
Flagship of Xindak's integrated
amplifiers.
-
Matched in style with MUSE Deluxe 1.0 CD player
-
High bias current for the 4 pairs of high
current output transistors that are coupled to heavy-duty
heat sinks through copper plates
-
Separate power supply for each channel, individual power
regulators for the preamp and power amp sections
-
Two powerful 580W toroidal
transformers housed in a specially built copper shield for
minimum electromagnetic leakage
-
Four Sweden 33000uF RIFA169
electrolytic capacitors in power supply system
-
Centralized control and monitoring system by microprocessor
-
One XLR balanced and two unbalanced inputs
to preamplifier
-
Preamp-Out and Main-In through
RCA connectors
-
Highest quality components throughout
-
Motorized ALPS potentiometer volume control by
Xindak's proprietary Analogy Potentiometer Digit Indirect
Control for minimizing signal path
-
Elegant two-tone or brushed
aluminum front panel design with VFD status display
-
Full function remote control
CNC machined from solid block of aluminum
|
